96 Pindou

96 PINDOU / MATERIAL PLANNER

How many fuse beads do I need?

Calculate the grid count first, then estimate coverage. Account for the size, boards, and material budget together.

Size is estimated from grid spacing and does not equal the physical size after ironing. The default grid spacing equals the bead diameter; you can adjust it after measuring your actual pegboard.

Usage and size

Calculating…

When estimating by grid count, the bag count is an estimate of full bags in equivalent quantities and cannot replace purchasing by color. After entering an actual pattern, an allowance is added for each color and the number of bags is rounded up separately. The budget is based on the quantity to prepare and excludes shipping, tools, and extra costs for buying full bags.

Quick size reference

The calculations below use 5mm grid spacing with 100% coverage. With 2.6mm beads, the same number of cells will produce a smaller size.

Number of cellsFull-grid limitEstimated size for 5mm beadsRecommended extra: 10%
14 × 14196 beads7.0 × 7.0 cm216 beads
29 × 29841 beads14.5 × 14.5 cm926 beads
52 × 522,704 beads26.0 × 26.0 cm2,975 beads
58 × 583,364 beads29.0 × 29.0 cm3,701 beads
87 × 877,569 beads43.5 × 43.5 cm8,326 beads
104 × 10410,816 beads52.0 × 52.0 cm11,898 beads
116 × 11613,456 beads58.0 × 58.0 cm14,802 beads
145 × 14521,025 beads72.5 × 72.5 cm23,128 beads

How is the number of bead boards calculated?

Horizontal boards = round up (horizontal cells ÷ cells per board); do the same vertically, then multiply. A 70×50 design using 29×29 boards needs 3×2, or 6 boards; using 52×52 boards, it needs 2×1, or 2 boards. Board specifications vary by brand and model, so no single size should be treated as the standard for all boards.

Does the bead count depend on the number of colors?

The total bead count mainly depends on the number of cells actually filled. More colors do not automatically increase the bead count, but may increase the number of bags to purchase and the difficulty of preparing materials. Reducing the background or the grid size can reduce bead usage. If the design has already been generated, using the actual usage list is more accurate than an estimate.